Each material during processing requires its own technology and line setup, especially the input and output part.
Rotary curing presses
The equipment is designed for continuous vulcanization process of technical rubber product such as rubber belts, roofing material, rubber belts with fabric, material for making seals, membranes, conveyor belts, flooring, etc.
The basis of the line is always the vulcanizing press. From the unwinding, the intermediate product is fed through the lower roller and from there it is fed into the gap between the heating drum and the pulling pressure belt, where the material is compressed and vulcanized.
The line consists of:
Main characteristics
| Parametres | Value | |
|---|---|---|
|
Max. Diameter of the wound/unwound semiproduct (roller diameter) |
tons/hour |
from 3 to 121 |
|
Clamping head size |
mm |
8 – 12 |
|
Curing drum diameter |
mm |
750 (1 200)2 |
|
Drum working width |
mm |
1100 ± 30 |
|
Pressing belt width |
mm |
± 20 |
|
Max. Semiproduct width |
m/min |
3,2 – 32 |
|
Max. Semiproduct thickness |
m/min |
max. 32 |
|
Pressure vulcanisation zone length |
m/min | 20 |
|
Pracovní rychlost linky |
mm |
1200 x 800 x 155 |
Gallery
